The Sawmill Store
Tools of the trade for Sawmills, Loggers and Arborists
Shopping Cart0  Items   $0.00

WoodlandPro 38RP Ripping Chain (.375 x .058 Guage)


Ripping chain is specifically designed to cut efficiently with the grain of the wood, unlike standard saw chain. It is most commonly used to slab logs, burls and stumps. Most people use it with chainsaw powered sawmills such as the Alaskan Sawmill or Beam Machine. Ripping chain gives you a smooth, consistent surface when cutting parallel to the grain of a log. On the contrary, standard saw chain is designed to sever wood across the grain, and when you saw parallel to the grain, your cutting speed falls dramatically, and your sawn surface becomes very rough.
38RP ripping chain is available for those that have .058 gauge bars. This ripping chain is used on bars from 16" to 32" long. The top plate of the semi-chisel cutter is ground at a 10 degree angle, while the side plate is ground at a 75 degree angle. 38RP is .375 pitch x .058 gauge (1.5mm). 38RP chain sharpens with a 7/32" round file or 3/16" grinding wheel. This chain is recommended for milling purposes only. It is not designed for standard hand held use.

100' Reel comes with 25 presets and tie straps

Pitch .375" (3/8)
Gauge .058" (1.5mm)
Sequence Standard
Cutter Type Ripping Chisel
Recommended Saw Sizes 3.0-6.0 cubic inches (50-100cc)
Kickback Reduction Features None
ANSI Approved Low Kickback Chain No
100' Reel Contains 1640 Drive Links

WARNING:This saw chain is capable of kickback and could result in serious injury to the saw operator or bystanders. Do not use this chain unless you are experienced in dealing with kickback. Saw chain with reduced kickback potential is available.

Add to Cart:

  • Model: WP100 38RP
  • Manufactured by: WoodlandPro

This product was added to our catalog on Sunday, January 31, 2010.

Your IP Address is:
Copyright © 2008-2020 The Sawmill Store | Rustic Template Design by Clyde Jones | Galaxy Host